Types of Roof Repairs You Need to Know About

How much does roof repair cost? What should I look out for when choosing a contractor? Is it better to hire a professional or do it myself?

The average homeowner spends $1,500 per year on home repairs. That means that every time you fix something around your house, you’re spending money. You must get the job done correctly the first time to save money.

Roof repair isn’t cheap. It can cost anywhere from $200 to $3,000, depending on the size of your roof and the extent of the damage. Before hiring anyone to perform roof repairs, you need to know what type of roof you have and whether it requires repair.

Shingle/Tile Replacement

Your roof is one of the most important parts of your home, so keeping it in good condition is important. Shingle and tile roofs can take a lot of abuse from hurricanes, sun exposure, and other factors like pests. Over time, this can lead to your shingles and tiles lifting, curling, breaking, or shrinking. Even minor damage to your roof can cause serious problems down the road, so it’s important to have any repairs done as soon as possible.

Shingle replacement is removing old shingles and replacing them with new ones. This process can be difficult because it requires a lot of work, but it is also less expensive than tile replacement.

Tile replacement is removing old tiles and replacing them with new ones on top of the existing roofing materials. It can be expensive, but it lasts longer than a shingle roof and provides better protection against leaks.

Fascia Replacement

Without a fascia board, your roof is vulnerable to all sorts of damage. Fascia boards are typically found behind gutters and support roofs as a first layer of protection against elements like water, animals, and mold. But because they’re constantly exposed to these things, they can become damaged over time. 

That’s why it’s important to know when it’s time to replace your fascia boards. Depending on the extent of damage and age of your board, you may only need to replace part of it or you may need a whole new one. It’s usually best to have this done by professional roofers. Here at No.

Draining Standing Water

The surface of a typical commercial or residential roof is not perfectly level. A slight slope is usually designed into the roof to allow rainwater and melting snow to drain off. However, sometimes water can pool on a roof due to sun damage, poorly installed drainage systems, or other factors. Allowing water to pool and remain on a roof could result in roof leaks, which can cause further structural damage. To completely resolve the issue, pinpoint the cause of the collected water to find a long-term solution for your roof.

Leak Repair

A leaky roof is one of the most common causes of water damage to homes. While flat roofs are particularly susceptible to leaking, all types of roofs can develop problems that lead to water seeping into your home. 

It’s important to take care of roofing problems as soon as they are discovered before they have a chance to cause extensive damage. A roofing professional can quickly identify the source of a leak and make the necessary repairs.

There are a few different types of leaks you may experience in your roof:

• Leaks at the seams or joints – This is usually due to improper installation or poor-quality materials.
• Leaks from the flashing – This is usually due to a poor seal between the flashing and the roofing material.
• Leaks from holes in the shingles – These holes may be caused by windblown debris or hail damage.
• Leaks from missing shingles – If you notice any missing shingles on your roof, it’s best to replace them as soon as possible before they cause any more damage.

Flashing Repair

Your roof is susceptible to damage from water seepage, especially around areas like chimneys, walls, and pipes. This is why the proper roof flashing installation is essential in directing water away from these vulnerable areas. Unfortunately, many issues with roof flashing are the result of poor installation. 

Regularly inspecting your roof flashing can help catch a problem early on, but you will likely need a professional roofer to fix or reinstall any damaged flashing. By taking care of your roof and addressing any issues as soon as they arise, you can prevent extensive damage and costly repairs down the road.

Types of Roof Repair

Flat Roof Repair

Flat roofs are great for many reasons. They are durable, they are low maintenance, and they are relatively inexpensive. However, flat roofs do have their drawbacks. One of the biggest problems with flat roofing systems is that they are prone to leaks. When water gets onto a flat roof, it runs off easily, causing damage to the surrounding area. Call a professional roof repair company immediately if you notice any cracks or holes in your roof.

Concrete Roof Repair

Concrete roofs are extremely durable and long-lasting. They are also very affordable. However, concrete roofs are not always leakproof. If you notice any cracking or leaking around your home, you should contact a professional roof repair company immediately.

Metal Roof Repair

Metal roofs are some of the best roofs out there. They are strong, durable, and have lasted for decades. Unfortunately, metal roofs are also expensive. If you notice any rust or corrosion on your metal roof, you should contact a roof repair company immediately.

Tile Roof Repair

Tile roofs are some of the most beautiful roofs out there. They look amazing and add value to your home. However, tile roofs are also very expensive. If you notice anything wrong with your tile roof, you should immediately contact an expert roof repair company. Call us today!

 …

8 Tips for Selecting a Roofing Contractor

When choosing the right contractor for your roofing needs, it is important to consider several factors. The roof system comprises several components – deck, membrane, insulation, and flashings – which must work together to be effective. Any problems with the application of these components can lead to premature failure. As such, you must select a contractor with the experience and expertise to carry out the work properly. From suggestions by Chando Roofing, here are 8 factors to take into account when making your decision:

Actual Cost

When choosing a contractor for a project, the price is often the main deciding factor. Various contractors are often asked to provide bid estimates for the job, and the one with the lowest price is awarded the project. This format is commonly used in public bids – such as local, state, or federal government projects – where rules usually stipulate that the low bidder must be given the job unless there is a valid reason to disqualify their bid.

Several potential problems exist with using a low-bid process for awarding construction contracts. First, it can result in inequality among bidders, as some may be able to offer lower prices than others due to having access to cheaper materials or labor. Additionally, low-bidder may make mistakes during bidding that could jeopardize project quality. Building owners and facility managers should consider all bids before avoiding these issues.

In deciding which contractor to hire, it is generally advisable to consider factors other than price. However, there may be circumstances where all the contractors you are considering are equally qualified and bidding on the same system, materials, and application procedures. In such a case, the price may be the deciding factor. It is important, however, to make sure that the lowest-priced bid is not simply the result of the contractor having missed something in the bid process.

Pre-qualify

To make sure that all contractors are qualified to perform the project, it is crucial to pre-qualify them before the bid process. This will guarantee that the contractors submitting bids have equivalent experience, professionalism, and craftsmanship.

Scope of work

When it comes to low-slope commercial roofs, you have many different options in terms of materials and systems. The method you choose for installation – a replacement or a recovery job – will also affect the cost. To get accurate bids from contractors, it’s best to provide a scope of work that outlines the materials, system, and installation method you want.

Contractors must include a comprehensive scope of work when submitting bids for a project. By doing so, you can be certain that your comparisons are accurate. Additionally, request a proposed schedule with an expected start time and expected completion date. 

Financial strength

It is important to vet your potential contractor by asking for their financial records from the past few years. This will show if they are reliable businesses with the resources to finish your project. The importance of financial stability increases as the project’s duration grows. You run the danger of being unable to complete the project or being stuck with shoddy work if you don’t hire a financially stable contractor.

A contractor’s financial strength can be best assessed by their main suppliers – manufacturers, disposal services, equipment companies, and distributors they regularly deal with. These suppliers can provide an accurate overview of a contractor’s financial stability.

Experience and history

When hiring a company, it is critical to analyze its past. A well-established company is more likely than a young company to produce superior workmanship. Checking to see if the firm has been operating with the same name and tax identification number for a long time might give you peace of mind that they are skilled and experienced. Additionally, check whether the company’s ownership and management have been stable or whether the company was recently sold to new owners. This could have an impact on how the company currently operates. Finally, check the company’s history for any bankruptcy or delayed tax filings.

Service record

Roofing firms have a history of providing subpar customer service. However, in recent years, the attitude has altered due to increased industry professionalism, a suffering economy, and rising competition. Most roofing companies today have distinct service divisions that take care of repairs, upkeep, and leak repair for completed roof areas. This is an important factor to consider when picking a contractor, especially since many warranties call for yearly roof system maintenance to remain in effect. Conducting this maintenance with the same company that installed the roof is often beneficial to the owner since that company has a vested interest in its long-term performance.

When you are in the process of bidding for a contractor, make sure to ask about their service rates and response time in case of a leak. Ideally, you want a contractor who can respond immediately or within 24 hours at the latest.

Track record

When choosing a contractor, it’s crucial to do your research. Make sure you ask the contractor for references, then get in touch with them. Learning how the contractor handles issues throughout the project is also crucial. To learn more about the contractor’s work on challenging projects, get in touch with the roofing manufacturers with which they are accredited. You can also contact your state’s Department of Professional Regulation or Better Business Bureau to see if the contractor has faced any complaints.

Insurance coverage

You should ensure that the contractor you hire has a current Certificate of Insurance. This will ensure that they are compliant with your requirements as well as the state requirements. It is important to check that the insurance coverage is still in effect for the project’s duration.

Workers’ compensation and general liability are two important coverages to evaluate. If the building, the landscaping, or the contents are damaged, the contractor should be covered by insurance. Given the nature of the construction, the damage is always possible. Additionally, workers’ compensation rates must adhere to state regulations. Be sure to confirm the most recent regulations with your state.

 

 …